Clear All
Filter
Out of stock

Ubiquiti UISP - airFiber - 60

0 out of 5

The AF60 is a 60GHz radio for low-interference and high-throughput connectivity. It's integrated with a high-gain dish antenna for long range and high performance.  60GHz radio with 5 GHz radio backup Low-interference 60GHz spectrum Long range, up to 2 km Up to 1 Gbps with low latency Integrated GPS Full and half bandwidth support

R6570,41 inc Vat
Read more

Ubiquiti UISP - EdgeRouter - X - SFP

0 out of 5

5 Gigabit RJ45 ports with passive PoE support 1 Gigabit SFP port for backhaul applications Ports configurable for line-rate, Layer-2 switching 260 kpps for 64-byte packets 1 Gbps for 1518-byte packets

R1593,90 inc Vat
Add to cart
Out of stock

Ubiquiti UISP - Fiber Instant - GPON ONU/ONT

0 out of 5

The Ubiquiti UFiber Instan t (model UF-Instant) is a GPON Optical Network Unit (ONU) conveniently packaged in a standard SFP module. This device enables routers or switches with an available SFP port to connect directly to a GPON fibre network, removing the need for a separate modem. It is powered via the SFP port and features a single SGMII Ethernet LAN interface. The UF-Instant conforms to the ITU-T G.984 GPON standard, making it a versatile solution for fibre-to-the-home (FTTH) and fibre-to-the-business (FTTB) applications. Specifications: GPON Standard: ITU-T G.984. WAN Interface: 1x SC/APC Connector. LAN Interface: 1x SGMII Ethernet. Management: In-Band Ethernet, PON. Power Method: SFP Port (3.3V). Max Power Consumption: 2W. Data Rates: 2.488 Gbps Downstream, 1.244 Gbps Upstream. Wavelengths: TX 1310 nm, RX 1490 nm. TX Power (Class B+): 1.5 to 5 dBm. RX Power: -28 to -8 dBm. Max Distance: 20 km. Operating Temperature: -10 to 45° C. Operating Humidity: 10 to 90% non-condensing.

R914,60 inc Vat
Read more

Ubiquiti UISP - UFiber Coexistence WDM Filter

0 out of 5

The Ubiquiti UISP UFiber Coexistence WDM Filter (UACC-UF-WDM-XGS) is a Wavelength Division Multiplexing module designed for service providers. It enables the simultaneous operation of XGS/XG-PON and GPON services over a single optical fiber. This filter effectively combines the different wavelengths, allowing for a straightforward upgrade path or the deployment of multiple services on existing fiber infrastructure without needing to run additional cables. The UACC-UF-WDM-XGS is an essential component for building a scalable and cost-effective fiber-to-the-home (FTTH) network.

R6197,24 inc Vat
Add to cart

Ubiquiti UISP - UFiber converter - Fiber to Copper

0 out of 5

The Ubiquiti UISP UFiber Active Ethernet UACC-AE is a fiber-to-copper media converter that allows service providers to deliver active fiber connections to customer premises and connect them to standard Ethernet equipment lacking SFP ports. It features one 1 Gbps SFP port and one 10/100/1000 Mbps RJ45 Ethernet port. The device can be powered by 802.3af PoE or 24V passive PoE. Networking Interfaces: (1) 1 Gbps SFP Port, (1) 10/100/1000 Mbps RJ45 Port Power Method: 802.3af PoE (Pins 1, 2+; 3, 6-), 24V Passive PoE (Pins 4, 5+; 7, 8-)    Max. Power Consumption: 1.5W Supported Voltage Range: 16 to 57V Operating Temperature: -40 to 60° C (-40 to 140° F) Operating Humidity: 10 to 90% Noncondensing

R788,10 inc Vat
Add to cart

Ubiquiti UISP - UFiber GPON - OLT SFP Module B+

0 out of 5

The Ubiquiti UISP UFiber GPON OLT SFP Module B+ is a Class B+ GPON Optical Line Terminal (OLT) transceiver designed for use in UFiber OLT devices. It supports single-mode fiber connections with an SC/UPC connector and operates at asymmetric speeds of 2.5 Gbps downstream and 1.25 Gbps upstream over a distance of up to 20 km.    Supported Media: Single- RX Wavelength: 1310 nm TX Power Range: 1.5 to 5 dBm RX Power Range: -28 to -8 dBm Downstream Data Rate: 2.5 Gbps Upstream Data Rate: 1.25 Gbps Cable Distance: 20 km

R1703,96 inc Vat
Add to cart

Ubiquiti UISP - UFiber GPON - OLT SFP Module C+

0 out of 5

The Ubiquiti UISP UFiber GPON OLT SFP Module C+ is a Class C+ GPON Optical Line Terminal (OLT) transceiver designed for use in UFiber OLT devices. It supports single-mode fiber connections with an SC/UPC connector and operates at asymmetric speeds of 2.5 Gbps downstream and 1.25 Gbps upstream over a distance of up to 20 km. The Class C+ module offers a higher power budget compared to Class B+.    Supported Media: Single-Mode Fiber    Connector Type: (1) SC/UPC TX Wavelength: 1490 nm RX Wavelength: 1310 nm TX Power Range: 3 to 7 dBm RX Power Range: -30 to -12 dBm    Downstream Data Rate: 2.5 Gbps Upstream Data Rate: 1.25 Gbps Cable Distance: 20 km  

R1911,42 inc Vat
Add to cart

Ubiquiti UISP - UFiber WiFi 6 - GPON ONU/ONT

0 out of 5

The Ubiquiti UISP UFiber WiFi 6 GPON ONU/ONT is a high-performance Optical Network Unit/Terminal (ONU/ONT) that integrates GPON connectivity with advanced WiFi 6 (802.11ax) wireless capabilities. It features a GPON WAN port, multiple Gigabit Ethernet LAN ports, and dual-band WiFi 6, providing high-speed internet access and wireless connectivity for residential and business users. GPON Standard: ITU-T G.984 WAN Interface: (1) SC/APC connector LAN Interfaces: Multiple Gigabit Ethernet RJ45 ports (Number may vary by model) Wireless Standard: WiFi 6 (802.11ax) Wireless Bands: 2.4 GHz and 5 GHz Concurrent Dual-Band MIMO: Multiple-Input, Multiple-Output (MIMO) technology for enhanced wireless performance Antennas: Internal antennas Management Interface: Web GUI, CLI, UNMS (Ubiquiti Network Management System) Power Method: DC Power Adapter (Specific voltage and current may vary by model)

R2365,55 inc Vat
Add to cart

Ubiquiti UISP – UFiber GPON OLT Headend 8 Port OLT + 2 x SFP+ ports

0 out of 5

The Ubiquiti UFiber OLT (UF-OLT) is a GPON optical line terminal designed for scalable fibre deployments. It includes management interfaces for streamlined integration and supports configuration via Bluetooth using the UISP mobile app. Built with a durable SGCC steel enclosure and modular power supply bays, it is ideal for Internet Service Providers (ISPs) and enterprise networks requiring reliable fibre connectivity. Key features: 8x GPON ports with 20 km reach per port Supports up to 1024 ONUs/ONTs Downstream: 2.488 Gbps, Upstream: 1.244 Gbps per port 2x 10 Gbps SFP+ uplink ports In-band and out-of-band Ethernet ports, RJ45 serial console Bluetooth configuration via the UISP mobile app Hot-swappable AC/DC power supplies with dual bays SGCC steel enclosure Operating temperature: -10°C to 45°C Humidity: 10% to 90% non-condensing

R38482,57 inc Vat
Add to cart

Ubiquiti UISP 27V 250W AC/DC Power Supply | UACC-PSU-27V-250W

0 out of 5

The Ubiquiti UACC-PSU-27V-250W is a hot-swappable AC/DC power supply unit specifically designed for use with the Ubiquiti UISP Power Professional. It delivers a reliable 27V, 250W power output, making it an ideal replacement or redundant power source to ensure continuous operation of your network equipment. The unit accepts a universal AC input from 100V to 240V and includes an AC power cord for immediate installation. Its hot-swap capability allows for replacement without powering down the main system, minimizing network downtime.

R3297,86 inc Vat
Add to cart

Ubiquiti UISP 4 Port Gigabit with 3 PoE Out Port NanoSwitch | N-SW

0 out of 5

The Ubiquiti UISP NanoSwitch N-SW is a 4-port unmanaged Gigabit switch engineered for outdoor installations. It provides four Gigabit RJ45 ports: one for 24V passive PoE input and three for PoE passthrough output. This configuration allows the switch to power up to three 24V PoE devices, perfect for connecting outdoor access points or cameras. The NanoSwitch delivers a total, non-blocking line rate of 4 Gbps. Housed in a durable, weatherproof enclosure, it is built to withstand harsh environmental conditions and includes a pole-mounting kit for straightforward installation.

R832,37 inc Vat
Add to cart

Ubiquiti UISP 54V 150W AC/DC EdgePower Module | EP-54V-150W-AC

0 out of 5

The Ubiquiti UISP 54V 150W AC/DC EdgePower Module EP-54V-150W-AC is a high-power, modular PSU system designed to connect to EdgePoint routers/switches, and provide reliable power to attached PoE devices. The EdgePower provides up to 150W of power output. With an optional PSU in the secondary bay, the EdgePower may be configured to deliver up to 300W of power. 

R1139,77 inc Vat
Add to cart