Clear All
Filter

Ubiquiti UniFi Network - Single-Mode Module SFP, 10G, 2 pack

0 out of 5

The Ubiquiti UniFi UACC-OM-SM-10G-D-2 includes two (2) UniFi 10G Single-Mode SFP+ (Small Form-factor Pluggable Plus) modules designed for long-reach single-mode fiber (SMF) connections. Each module supports a data rate of 10 Gbps and is used for high-speed links over longer distances. Form Factor: SFP+ Connector Type: (1) LC Duplex per module Supported Media: Single-Mode Fiber (SMF) Wavelength: 1310 nm Data Rate: 10 Gbps Maximum Reach: Up to 10 km (dependent on fiber and link budget) Operating Temperature: 0 to 70° C (32 to 158° F) Quantity: 2 modules per pack

R1922,80 inc Vat
Add to cart

Ubiquiti UniFi Network - Single-Mode Module SFP, BiDi, 2 pack

0 out of 5

The Ubiquiti UniFi includes two (2) UniFi 10G Bidirectional Single-Mode SFP+ (Small Form-factor Pluggable Plus) modules designed for single-strand single-mode fiber (SMF) connections. These modules utilize different wavelengths for transmit (TX) and receive (RX) over a single fiber, allowing for cost-effective long-distance 10 Gbps links. They are typically sold in pairs where one module transmits at one wavelength and receives at another, and the partner module does the opposite. Form Factor: SFP+ Connector Type: (1) LC Simplex per module Supported Media: Single-Mode Fiber (SMF) Wavelength (Module A): 1270 nm TX / 1330 nm RX Wavelength (Module B): 1330 nm TX / 1270 nm RX Data Rate: 10 Gbps Maximum Reach: Up to 10 km (dependent on fiber and link budget) Operating Temperature: 0 to 70° C (32 to 158° F) Quantity: 2 modules per pack (intended for use as a pair)

R3602,72 inc Vat
Add to cart

Ubiquiti UniFi Pro 48 Port 40 PoE 600W Switch 4SFP+ | USW-Pro-48-PoE

0 out of 5

The Ubiquiti UniFi Switch Pro 48 PoE USW-Pro-48-POE is a Layer 3 managed Gigabit Ethernet switch ideal for enterprise networks. This 1U rack-mountable switch features 48 ports, with 40 supporting 802.3at PoE+ (up to 30W per port) and 8 supporting 802.3bt PoE++ (up to 60W per port), delivering a total PoE power output of 600W. This high-capacity power supply enables efficient powering of access points, IP cameras, and IP phones. Four 10G SFP+ uplink ports offer high-speed connectivity. Advanced Layer 3 capabilities include inter-VLAN routing, static routing, and DHCP server functionality. The switch is managed via the UniFi Network application version 5.10.5 or later and consists of a 1.3-inch touchscreen for local monitoring. It operates on a universal AC power supply (100–240V) and supports optional DC backup via the UniFi SmartPower RPS (sold separately). Certified CE, FCC, and IC compliant. Key features: 48 Gigabit Ethernet ports with PoE+ and PoE++ support 600W total PoE budget for powering multiple devices Four 10G SFP+ uplinks for high-speed fibre connections Advanced Layer 3 features, including a DHCP server and routing 1U rack-mountable with 1.3-inch touchscreen for easy monitoring AC power with optional SmartPower RPS backup CE, FCC, and IC certified

R23883,20 inc Vat
Add to cart

Ubiquiti UniFi Protect - LED floodlight with motion sensor

0 out of 5

Ubiquiti UP-FLOODLIGHT is a smart managed floodlight with integrated motion detection and light sensor, housed in a compact, sleek design for low profile mounting. It's easy to set up and configure thanks to the UniFi Protect app.  Features:  Integrated motion and light sensors for floodlight control and management  Detects motion at up to 5 meters Provides 550 Lumens of intense LED light PoE input (802.3af) Durable IPX5 waterproof housing  Easy set up and configuration with the UniFi Protect Mobile App Included wall mount, angle mount and screw kit UniFi Protect is required to run this product with full functionality. We recommend using it with the UniFi Dream Machine Pro or the UniFi Protect Network Video Recorder.  

R2751,38 inc Vat
Add to cart

Ubiquiti UniFi Protect 1SFP+ GbE 4 Bay NVR | UVC-UNVR

0 out of 5

The Ubiquiti UniFi Protect UNVR is an enterprise-grade network video recorder built for scalable, reliable surveillance. It integrates seamlessly into UniFi networks and is managed through UniFi OS for centralised configuration and monitoring. With four 2.5-inch or 3.5-inch drive bays, it supports large-capacity storage and automatically configures drives in RAID 1 or RAID 5 for data redundancy. The UNVR can retain up to 30 days of 4K footage from 15 cameras or Full HD footage from 50 cameras. Housed in a 1U rackmount chassis, it includes a rack kit for professional deployment and supports the optional USP-RPS for redundant power. Network connectivity includes one 10G SFP+ port and one Gigabit RJ45 port. Key features Supports up to 15 4K or 50 Full HD UniFi Protect cameras Four 2.5" or 3.5" drive bays with RAID 1 or RAID 5 configuration Up to 30 days of storage, depending on drive size and resolution 1U rackmount form factor with included rackmount kit Redundant power supported via USP-RPS (sold separately) Managed through UniFi OS and integrated with UniFi Protect 1x 10G SFP+ port and 1x Gigabit RJ45 port for network connectivity

R7621,63 inc Vat
Add to cart

Ubiquiti UniFi Protect 3U 16 Bay 2SFP+ Enterprise Network Video Recorder

0 out of 5

R43258,05
Add to cart

Ubiquiti UniFi Protect IR Range Extender for G4 Bullet | UVC-G4-LED

0 out of 5

The Ubiquiti UVC-G4-LED is an infrared LED accessory designed to enhance the night vision performance of the UniFi Protect G4 Bullet Camera. It extends the camera’s IR illumination range up to 25 metres (82 feet) for improved low-light visibility. The unit mounts directly to the G4 Bullet and is powered and controlled through the camera, eliminating the need for separate wiring. Built with a weather-resistant enclosure, the UVC-G4-LED is suitable for outdoor installations in challenging conditions Key features Extends IR night vision range up to 25 m (82 ft) Direct attachment and integration with G4 Bullet Camera Powered and controlled via the camera—no additional wiring Weather-resistant design for outdoor use Clean, low-profile installation

R1137,24 inc Vat
Add to cart

Ubiquiti UniFi SmartPower Cable | USP-Cable

0 out of 5

The Ubiquiti UniFi SmartPower Cable (USP-Cable) is a 1.5 m proprietary DC power cable used to connect supported UniFi devices to the UniFi SmartPower Redundant Power System (USP-RPS). It ensures continuous power delivery in the event of a power supply failure, supporting uninterrupted network operation. The cable features a toolless, plug-and-play design for fast and simple installation. Engineered specifically for the UniFi SmartPower system, it provides a stable and reliable power redundancy solution. Key features Model: USP-Cable Length: 1.5 metres Connector: UniFi SmartPower proprietary interface Compatible with the USP-RPS power system Toolless, plug-and-play installation

R670,45 inc Vat
Add to cart

Ubiquiti UniFi Switch Pro 24 Port PoE 400W | USW-Pro-24-PoE

0 out of 5

The Ubiquiti UniFi Switch Pro 24 PoE (USW-Pro-24-POE) is a high-performance Layer 3 managed switch designed for demanding network environments, offering robust performance and flexible power options ideal for networks requiring advanced management and reliable PoE support. It features 16x Gigabit Ethernet ports with 802.3af/at PoE+ support delivering up to 30W per port, and eight Gigabit Ethernet ports with 802.3bt PoE++ support delivering up to 64W per port, with a total PoE budget of 400W. 2x 10G SFP+ ports provide high-speed uplinks, while advanced Layer 3 capabilities include inter-VLAN routing, static routing, and DHCP server functionality. Key features: Supports up to 1,000 VLANs and a MAC address table of 16,000 entries Rack-mountable 1U form factor with universal 100–240V AC power supply and optional DC power backup via UniFi SmartPower RPS (sold separately) 1.3-inch touchscreen display for simplified monitoring and management Managed through the UniFi Network application (version 5.10.5 or later) Complies with CE, FCC, and IC standards

R15161,03 inc Vat
Add to cart

Ubiquiti UniFi WiFi 5 AC Mesh Outdoor Dual Band Access Point | UAP-AC-M

0 out of 5

The Ubiquiti UniFi AC Mesh UAP-AC-M is a weather-resistant dual-band Wi-Fi 5 Access Point designed for outdoor deployments requiring reliable, high-speed connectivity. It supports up to 200 concurrent clients with data rates of 867 Mbps on the 5 GHz band and 300 Mbps on the 2.4 GHz band. Equipped with 2x2 MU-MIMO and four spatial streams, it ensures efficient performance across both frequency bands. Antenna gain is rated at 4 dBi (5 GHz) and 3 dBi (2.4 GHz), with IPX4 protection against water splashes, making it suitable for versatile outdoor applications. The device is powered via PoE (44–57V DC) with a maximum power draw of 8.5W and is managed through the UniFi Network application (version 6.0.45 or later). Certified CE, FCC, IC, and UKCA compliant. Key features: Supports up to 200 concurrent clients with 2x2 MU-MIMO 802.11ac and 802.11n compatibility with four spatial streams IPX4-rated enclosure for reliable outdoor performance PoE-powered with a maximum power consumption of 8.5W UniFi Network application support for centralised management CE, FCC, IC, and UKCA certified for regulatory compliance

R2054,36 inc Vat
Add to cart

Ubiquiti UniFi6 Dual Band WiFi 6 Pro Indoor Access Point | U6-PRO

0 out of 5

The Ubiquiti UniFi U6-Pro is a dual-band Wi-Fi 6 (802.11ax) access point for medium to large indoor areas, delivering up to 5.3 Gbps total throughput and supporting over 350 connected devices. It provides 4.8 Gbps on the 5 GHz band with 4x4 MU-MIMO and 573.5 Mbps on the 2.4 GHz band with 2x2 MU-MIMO. The unit has a polycarbonate enclosure with a stainless steel mounting bracket and an IP54 rating, and can be installed on walls or ceilings using Power over Ethernet (802.3at PoE+, 48 V, 0.5 A) with a maximum power draw of 13 W. It is managed through the UniFi Network application (version 6.0.45 or later) and supports band steering, fast roaming (802.11r), guest network isolation, and RADIUS over TLS (RadSec). It operates in the 2.4 GHz (2400–2472 MHz) and 5 GHz (5150–5850 MHz) frequency bands in compliance with regulations.

R3542,00 inc Vat
Add to cart

UFL to N-Type(f) - 300mm Pigtail for Mini PCI Cards, RG174

0 out of 5

This 300mm pigtail cable features a UFL connector on one end and an N-Type female connector on the other. It utilises RG174 coaxial cable to provide a reliable connection for Mini PCI cards. The cable is designed for secure attachment in wireless networking setups requiring standard N-Type interfaces.

R98,67 inc Vat
Add to cart